SOLO is surprising for aromatic charge and completeness of taste, as well as for the unusual long life and high aromatic level in any vape system.

SOLO has organoleptic characteristics comparable to those of traditional tobacco extracts.

How comes into being SOLO?

The production of the aroma starts with the tobacco leaves that we have selected over the years, dedicating a specific treatment and processing to each cultivar.

These processes have enabled us to enhance their qualities, obtaining the maximum aromatic expression.

We have used more extraction and purification techniques than anyone ever before.

"The challenge was arduous: to produce organic aromas with organoleptic characteristics comparable with traditional aromas but which could reduce as much as possible the phenomena of deterioration of the coils making them usable in an absolutely lasting way even in non and in the POD.

SOLO is the last milestone achieved in years of studies and experimentation, we have modified and designed from scratch production plants, implemented innovative extraction and purification techniques never used, all to reach the goal we had set ourselves: create a new line of products that can truly and fully satisfy the new vaping machines, increasingly demanding and prepared.”

Renzo Cattaneo

The line only is available in different formats:

SOLO 20+40

SOLO 10+10

SOLO READY-TO-VAPE 10ml

SHOT 10+10 ml

FLAVOUR 10 ml + BASE 10 ml = FINISHED LIQUID 20 ml

The 30 ml bottle contains 10 ml of flavours with a concentration designed to prepare a total of 20 ml.

You can get a nicotine concentration level between 0 and 10 mg/ml.

The finished product will have the following compition: 50/50 (50% VG, 50% PG).

50/50 composition

NICOTINE CONCENTRATION mg/mlADD 10 ml
0shot VG 10 ml 0 mg/ml
2shot VG 10 ml 4 mg/ml
4shot VG 10 ml 8 mg/ml
5shot VG 10 ml 10 mg/ml
6
shot VG 10 ml 12 mg/ml
9
shot VG 10 ml 18 mg/ml
10shot VG 10 ml 20 mg/ml

SHOT 10+20 ml

FLAVOUR 10 ml + BASE 20 ml = FINISHED LIQUID 30 ml

The 30 ml bottle contains 10 ml of flavour with a concentration designed to prepare a total of 30 ml.

You can get a nicotine concentration level between 0 and 13.5 mg/ml.

The finished product will have the following compition: 50/50 (50% VG, 50% PG) and 70/30 (70% VG, 30% PG).

Composition 50/50

*some indicated nicotine gradations are rounded (on finished liquid)

NICOTINE CONCENTRATION mg/mlADD 20 ml
shot 50/50 10 mlshot VG 10 ml
00 mg/ml0 mg/ml
1,54 mg/ml0 mg/ml
2,58 mg/ml0 mg/ml
3,510 mg/ml0 mg/ml
4
12 mg/ml0 mg/ml
6
18 mg/ml0 mg/ml
6,520 mg/ml0 mg/ml
7,518 mg/ml4 mg/ml
820 mg/ml4 mg/ml
9,520 mg/ml8 mg/ml
1020 mg/ml10 mg/ml
10,520 mg/ml12 mg/ml
1218 mg/ml18 mg/ml
12,520 mg/ml18 mg/ml
13,520 mg/ml20 mg/ml

Composition 70/30

*some indicated nicotine gradations are rounded (on finished liquid

NICOTINE CONCENTRATION mg/mlADD 20 ml
shot VG 10 mlshot VG 10 ml
00 mg/ml0 mg/ml
1,54 mg/ml0 mg/ml
2,58 mg/ml0 mg/ml
3,510 mg/ml0 mg/ml
4
12 mg/ml0 mg/ml
6
18 mg/ml0 mg/ml
6,520 mg/ml0 mg/ml
7,518 mg/ml4 mg/ml
820 mg/ml4 mg/ml
9,520 mg/ml8 mg/ml
1020 mg/ml10 mg/ml
10,520 mg/ml12 mg/ml
1218 mg/ml18 mg/ml
12,520 mg/ml18 mg/ml
13,520 mg/ml20 mg/ml

SHOT 20+40 ml

FLAVOUR 20 ml + BASE 40 ml = FINISHED LIQUID 60 ml

The 60 ml bottle contains 20 ml of flavour with a concentration designed to prepare a total of 60 ml.

You can get a nicotine concentration level between 0 and 12 mg/ml.

The finished product will have the following compition: 50/50 (50% VG, 50% PG) and 70/30 (70% VG, 30/ PG).

Composition 50/50

NICOTINE CONCENTRATION mg/mlADD 40 ml
WITH NICOTINE
WITHOUT NICOTINE
01 x PG 10 ml
1 x VG 30 ml
31 x SHOT PG 10 ml nic 18 mg/ml1 x VG 30 ml
62 x SHOT 50/50 10 ml nic 18 mg/ml1 x VG 20 ml
9
3 x SHOT VG 10 ml nic 18 mg/ml1 x PG 10 ml
12
1 x SHOT PG 10 ml nic 18 mg/ml
3 x SHOT VG 10 ml nic 18 mg/ml

Composizione 70/30

NICOTINE CONCENTRATION mg/mlADD 40 ml
WITH NICOTINE
WITHOUT NICOTINE
01x VG 40 ml
31 x SHOT VG 10 ml nic 18 mg/ml1x VG 30 ml
62 x SHOT VG 10 ml nic 18 mg/ml1x VG 20 ml
9
3 x SHOT VG 10 ml nic 18 mg/ml1x VG 10 ml
12
4 x SHOT VG 10 ml nic 18 mg/ml

CONCENTRATED FLAVOUR 10 ml

FLAVOUR 10 ml + BASE 90 ml = FINISHED LIQUID 100 ml

Concentrated flavours should not be used pure, they must necessarily be diluted in the neutral base with concentration to taste (recommended 10%).

These mixtures do not need particular aging times as the aroma is well favored in the glycolic part that is the solvent normally used.

You can get a nicotine concentration level between 0 and 10 mg/ml.

The finished product will have the following compition: 50/50 (50% VG, 50% PG), 70/30 (70% VG, 30% PG) and 45/45/10 (45% VG, 45% FU purified water).

Composition 50/50

NICOTINE CONCENTRATION mg/mlADD 90 ml
VGPGSHOT 10 ml
050 ml
40 mlno shot
245 ml35 ml1 x shot 50/50 20 mg/ml
440 ml
30 ml2 x shot 50/50 20 mg/ml
635 ml25 ml3 x shot 50/50 20 mg/ml
8
30 ml20 ml4 x shot 50/50 20 mg/ml
10
25 ml15 ml5 x shot 50/50 20 mg/ml

Composition 45/45/10

NICOTINE CONCENTRATION mg/mlADD 90 ml
VGPGSHOT 10 ml
045 ml
35 mlno shot
shot purified water Fu
240 ml30 ml1 x shot 50/50 20 mg/ml
shot purified water Fu
435 ml
25 ml2 x shot 50/50 20 mg/mlshot purified water Fu
630 ml20 ml3 x shot 50/50 20 mg/mlshot purified water Fu
825 ml15 ml4 x shot 50/50 20 mg/mlshot purified water Fu

SHOT 4+6 ml K-TPD

FLAVOUR 4 ml + K-TPD BASE 6 ml = FINISHED LIQUID 10 ml

The 15 ml bottle contains 4 ml of flavour with a concentration designed to prepare a total of 10 ml.

You can get a nicotine concentration level between 0 and 12 mg/ml as shown in the labels of the dedicated K-TPD bases.

The finished product will be based on 50/50 (50% VG, 50% PG).

NICOTINE CONCENTRATION mg/mlADD 6 ml
0base K-TPD VG
3base K-TPD 50/50 5 mg/ml
6base K-TPD 50/50 10 mg/ml
9base K-TPD 50/50 15 mg/ml
12
base K-TPD 50/50 20 mg/ml